Manual Force Test Stand configured for digital button pull off testing

Hand press configured as button pull off force tester
Manual Force test stand derived from hand press

Rack and pinion hand press forms the basis of the force test stand

A new force test stand has been added to our product range (HPTS-500N), based on a rack and pinion hand press.

With the addition of some brackets to raise the throut clearance for the attached gauge and button clamp, plus two toggle clamps and retention plate to restrain the material which the button under test is attached, we have a stand alone low cost button pull off test solution.

Button pull off force testing system

Hand press configured as button pull off force tester

Operation of the system can be viewed in the following video

http://youtu.be/2nYagQgeChA

Peak pull off force captured by digital force gauge

Peak force to pull off button captured digitally.